VZ
HyperLink VZ Gateway FAQs
I’VE RUN OUT OF ETHERNET PORTS ON MY GATEWAY. HOW DO I ADD MORE COMPUTERS OR DEVICES? Plugging in an Ethernet hub or switch expands the number of ports on your Gateway. Run a straight-through Ethernet cable from the Uplink port of the new hub to the ...
HyperLink VZ Setting up your Gateway
There are three basic steps to setting up your Gateway: Step 1: Connect your Gateway to the Internet Step 2: Connect your network device to your Gateway Step 3: Configure your Gateway STEP 1 - CONNECT YOUR GATEWAY Remove your Gateway, Ethernet ...
HyperLink VZ Gateway Troubleshooting
IF YOU ARE UNABLE TO CONNECT TO THE INTERNET The first thing to check is whether your Gateway is powered on and it is connected to the Internet. Check the Power/Internet light on the front of the Gateway; if it is lit a solid white color, then the ...
HyperLink VZ Internet Gateway Overview
Front Panel The front panel has two lighted indicators and a WPS (Wi-Fi Protected Setup) button. The Power/Internet light will be on and solid white when your Gateway is turned on, connected to the Internet, and functioning normally. The Wireless ...